WATERTIGHTNESS

Watertightness Tester WSP 3600V4

WSP 3600 is designed for easy determination of the watertightness of roofing membranes according to EN 1928 Method A with a testing pressure up to 1100mm. For the determination of the watertightness a constant water head / pressure is applied on the sample over time. WSP 3600 controls the time and the pressure. The pressure is applied with a real water column, which is controlled by an ultrasonic distance sensor.

The testing is done in 3 steps:

  1. The pressure is applied with a pump which fills the test chambers and column till the pressure set-point is reached.
  2. Once the pressure set-point is reached, the time counter starts and the instrument keeps the pressure constant
  3. Once the timer is finished, the instrument will empty automatically.

Technical Data

  • corresponds to EN 1928 method A
  • microprocessor controlled with touchscreen interface (PLC with 3.5” touchscreen HMI)
  • 3 inspection places
  • magnetic inserting assistance
  • inspection surface: ø 150 mm
  • sample size: ø 200 mm
  • maximum test pressure: 1100 mm
  • minimum pressure: 50 mm
  • test pressure is pre-selectable in 1 mm steps
  • accuracy of pressure +/- 3% of nominal value from 100 mm
  • testing period is pre-selectable: up to 99:59:59 h in 1 sec steps
  • automatic pressure re-adjusting over the entire testing period
  • dimensions: 930 mm/450 mm/1550mm
  • weight: approx. 32 kg
  • operating voltage: 1 x 24 VDC (power pack 220 VAC/24 VDC)/150 VA
  • Attention: Your room height has to be large enough (table to ceiling).
  • Subject to modifications in the interest of technical progress.
Further information