Products  >  Rhopoint MFFT  >  Rhopoint MFFT 90
About us
• Permeation
• Rhopoint Optimap
• Rhopoint IQ DOI (Orange Peel) Gloss & Haze
• Rhopoint Gloss- and Hazemeter
• Transmission Hazemeter
• Rhopoint Novo-Curve
• Opacity & Shade & Cleanliness
• Rhopoint MFFT
Rhopoint MFFT 60
Rhopoint MFFT 90
• Rhopoint Paintlab
• Rhopoint Viscometer + Viscomixer
• Watertightness
• Thickness
• Friction
• Crease and Board Stiffness
• Meltflowindex
• Film Shrinkage
• Rub Test
Products (Manufacturer)
• Gintronic AG
• Rhopoint
• Hanatek Ltd
• MRS Seitter GmbH
Products (Norms)
Used Products
Application Lab
Rhopoint MFFT 90

Paints and Coatings
The minimum film-forming temperature (MFFT) of a paint or coating is the lowest temperature at which it will uniformly coalesce when laid on a substrate as a thin film. The standard test for determining this temperature involves using a MFFT-BAR, as specified by such standards as ASTM D 2354 and ISO 2115. The design of the Rhopoint instrument is based directly on these standards.
The MFFT of one-pack adhesives can be found in a similar way to paints and coatings. With two-pack adhesives, a strip of aluminium foil can be laid on the platen, to ease cleaning, before applying the adhesive. Two-pack adhesives do not show an MFFT, but the minimum cure temperature can be found by scraping the sample with a spatula
The new MFFT benefits from an easy to use touch screen interface, digital MFFT temperature calculation and output to handy results labels. These additions to the trusted Rhopoint MFFT make the instrument easier to operate with improved certainty of results.
The temperature bar consists of a copper platen with an electronically imposed temperature gradient. Built in temperature sensors monitor the temperature across the platen, a graph of the gradient is displayed on the touch screen.
Purge gas is integrally dried, and flows over the platen via a sintered distribution block. The hinged perspex cover provides thermal and atmospheric insulation whilst allowing constant visual inspection of a test. A cursor is moved to indicate the identified MFFT point; the instrument calculates and displays the temperature in the required units.
The instrument can be supplied with an optional results label printer. Recorded values include the time and date of the test and identified minimum film forming temperature. The printed label can be attached to retained sample bottles or job sheets.


The Rhopoint MFFT is the industry leading instrument for measuring the minimum film forming temperature of water based materials. Definition - “MFFT is the lowest temperature at which a latex, emulsion or adhesive will uniformly coalesce when laid on a substrate as a thin film.” An accurate MFFT value allows the formulation of products that cure correctly under specified application conditions. The Rhopoint MFFT works by holding a very accurate temperature gradient across a nickel plated copper platen. A flow of dried air across the platen stops condensation forming and gives repeatable test conditions.
- Determines the MFFT of latex, emulsions and adhesives
- Rhopoint MFFT 90 measures between -5º and 90ºC
- Designed to conform to ISO 2115 and ASTM 2354
- Paints, resins and adhesives

MRS Seitter GmbH - Rhopoint MFFT 90
more pictures

Technical Data:

Technical Data:

Conforms to:
ASTM D 2354, ISO 2115,
DIN 53787

-10˚C to 90˚C operation

Platen dimensions:483mm x 235mm ( L x W)

Air: 4 l min-1 @ 100 psig

Water: Mains pressure; gravity drain
inlet temperature <15°C

110-120V AC or
220-240V AC

Packed Dimensions:
590mm x 900mm x 690mm (H x W xD)

350mm x 550mm x 610mm ( H x W x D)


Packed weight:
Brochure Download
Request more Informations
Print page